Skip to product information
Buy on Amazon
MOGOFE Yellow Titan RV Roof Sealant Tape — Waterproof Butyl Repair Tape, 50 ft
Current checkout: Purchases are completed on Amazon.com. Amazon shows the current price, eligible options, delivery estimate and return eligibility before you order.
Seal common RV roof leak paths with a repair tape that is easier to choose and install. MOGOFE Yellow Titan RV Roof Sealant Tape uses a pressure-applied butyl adhesive for non-structural sealing around roof seams, vents, skylights, windows and other common weather-exposed joints.
Choose Standard when you need the documented width and color range. Choose MAX when you specifically need the extra-thick White / 4 in × 50 ft format. Match the width to the repair, prepare a stable and completely dry surface, place the tape without stretching, and press firmly from edge to edge.
Documented product family
- Standard: 1.5, 2, 4 or 6 in × 50 ft; White or Black
- MAX: 4 in × 50 ft; White only
- Every documented roll is 50 feet long.
Amazon.com shows the current purchasable offer, price and eligible options. Not every documented configuration is necessarily available at every time.
Key product facts
- Waterproof butyl sealing layer
- UV- and weather-resistant outdoor construction
- Intended for flat, curved and corner applications
- Listed surface families include EPDM, TPO, rubber, metal, fiberglass, wood, plastic and glass
- Peel, place and press application; no torch or liquid mixing
Common uses
- RV and camper roof seams
- Vent and skylight perimeters
- Trailer and motorhome window edges
- Membrane transitions and other non-structural joints
Choose enough width
Measure the complete damaged area or seam. Select a width that covers it and still reaches clean bonding surface on both sides. Do not size the tape from the visible crack alone: weak coating or the leak path can extend farther.
Surface preparation
Remove dirt, dust, oil, wax, moisture, loose coating and failing old sealant. Repair rotten, delaminated or structurally damaged material first. A material name alone does not guarantee adhesion to every coating or aged surface; test a small prepared area when the finish is uncertain.
Four-step installation
- Inspect the full leak path and repair unstable substrate.
- Clean the complete bonding path and let it dry fully.
- Dry-fit, cut and position the tape without stretching.
- Press across the full width and recheck every edge, corner and transition.
Read the complete installation guide · Check surface compatibility · Choose a width
Use limits
This is a non-structural sealing product. Do not apply directly over wet, dirty, oily, loose or rotten material. Do not use it for pressurized plumbing, fuel-system or underwater repairs. Product-specific instructions and the RV or membrane manufacturer’s repair requirements take priority.
Current purchase channel
- Current purchases are completed on Amazon.com.
- Amazon displays the live price, available offer, delivery estimate and destination eligibility before checkout.
- Amazon handles payment, order tracking, cancellation, delivery and marketplace return eligibility for Amazon orders.
- MOGOFE provides product guidance and a separate 12-month limited product warranty for covered manufacturing defects.
Buy on Amazon · Purchase & Delivery · Returns & Refunds · 12-Month Limited Warranty
Questions before purchase? Email contract@mogofe.com.
Current offer
Live price & customer feedback
50 ftevery roll
9 configurations8 Standard + 1 MAX documented
Amazon.comcurrent checkout channel
30-second product overview
See Yellow Titan’s material, format and repair context.
This approved overview shows the product and the preparation sequence in 30 seconds. It does not replace roof inspection or surface compatibility checks.
Video length: 30 seconds. The MP4 loads only after you select play.
Real installation demonstration
Watch the tape being handled and applied.
Use this RV-focused demonstration to judge scale, handling and application. Inspect your own roof and confirm surface condition before completing a repair.
See current customer videos, feedback and offer on AmazonSurface condition, preparation and application pressure affect results.
Standard or MAX
Choose the format the job needs.
Standard offers four widths in white or black. MAX is the thicker white 4-inch format. Both contain 50 feet of tape.
FormatStandardMAX
Thickness1.0 mm1.2 mm
Widths1.5, 2, 4, 6 in4 in
ColorsWhite / blackWhite
Length50 ft50 ft
Development & testing notes
Seven years focused on the details that decide a repair.
Material choice, usable coverage, surface preparation and full-pressure application were refined as one system. The figures below report documented material test conditions. They are not a universal service range.
Test results describe samples under stated methods and conditions. An installed seal also depends on substrate integrity, contamination, weather, coverage and application pressure.
Choose your width
Measure the repair before the roll.
Cover the complete damaged area and leave clean bonding surface on both sides. The weak coating or leak path can extend beyond the visible crack.
- 1.5 and 2 inches suit compact trim, narrow seams and targeted edge work.
- 4 inches is a practical choice for many roof seams and vent perimeters.
- 6 inches gives broader coverage for wide transitions and patches.
- Add every planned run, overlap, corner and trim allowance; divide by 50 feet and round up.
Tape cannot restore rotten or structurally damaged material. Repair the substrate first.
Surface compatibility
Check the surface type and its condition.
Condition, coating and preparation determine whether the adhesive can make full contact.
EPDM & TPO
Confirm the membrane is intact, clean and dry. Follow the roof maker’s repair guidance for aged or coated membranes.
Metal, fiberglass & glass
Remove oxidation, oil, wax and loose sealant. Stable full-surface contact matters across the complete repair.
Rubber, wood & plastic
Porous, weathered or low-energy plastics vary. Test a small prepared area before completing installation.
Compatibility is not a guarantee for every coating, finish or aged substrate.
Install with intent
Clean. Plan. Place. Press.
- 01Inspect the full area
Locate the leak path and remove loose or failed material. Repair structural damage first.
- 02Prepare a dry surface
Remove dirt, oil, wax, moisture and loose old sealant. Let the area dry completely.
- 03Dry-fit and cut
Plan the tape run before removing the release liner. Avoid unnecessary stretching.
- 04Press edge to edge
Apply steady pressure across the full width, especially at corners and changes in level.
Installation requires no torch or mixing. Apply only to a clean, dry and stable surface.
Current purchase path
Product facts here. Transaction details on Amazon.
Checkout & delivery
Amazon displays the current price, available offer, delivery estimate and destination eligibility before checkout.
Purchase & delivery detailsAmazon order service
Amazon handles payment, order tracking, cancellation, delivery and marketplace return eligibility for Amazon orders.
Returns & refunds detailsMOGOFE limited warranty
A 12-month limited product warranty covers manufacturing defects; it does not insure installation work, the roof or other property.
Complete warrantyProduct questions
Check the job before checkout.
Exact answers for fit, variants, installation and the terms that matter.
Which sizes and colors are available?
Standard comes in 1.5-, 2-, 4- and 6-inch widths, each in white or black. MAX comes only in White / 4 in × 50 ft. Every roll is 50 feet long.
Is this tape waterproof?
It is a waterproof butyl sealing tape for RV roof repair and weather-exposed seams. A reliable seal still depends on full coverage, a clean dry substrate and firm pressure.
Is it UV and weather resistant?
Yes. It is designed for outdoor RV use and weather exposure. Exposure, roof condition and installation quality vary, so this is not a universal lifespan promise.
Can I use it on EPDM or TPO?
EPDM and TPO are listed surface families. Confirm the membrane maker permits the repair method and test aged, coated or contaminated material first.
Does it need extra glue?
The tape has an integrated butyl adhesive layer for peel, place and press application. Roof-system-specific repair instructions take priority.
Can I apply it over old sealant?
Do not apply over loose, dirty, oily or failing material. Remove what is unstable and create a clean dry bonding path. Whether sound old sealant can remain depends on condition and compatibility.
How much tape is on one roll?
Every Standard and MAX variant contains 50 feet. Add all planned runs, corners, overlaps and trimming before choosing quantity.
Where do I see the current price and delivery estimate?
Open the linked MOGOFE offer on Amazon.com. Amazon displays the current price, available offer, destination eligibility and delivery estimate before checkout.
Who handles returns and refunds?
For an Amazon order, begin with Amazon Your Orders. Amazon displays and administers the marketplace return or refund options that apply to that order. The MOGOFE limited product warranty is a separate product-defect remedy.
What warranty applies?
A 12-month limited product warranty covers manufacturing defects. It does not insure installation work, the RV roof or other property.